Vodafone vfd 200 Remove simlock Done

---

htc Desire 820s dual sim imei repair successfully done

[31]META Port Detected: Gadget CDC VCOM Driver (COM31)
USB\VID_0E8D&PID_2007\5&290A8F25&0&1
Start sync target, waiting responce.....
Starting META using port[COM31], wait...
Brand: HTC
Board: lcsh6752_lwt_kk
Model: HTC Desire 820s dual sim
Name: a50ml_dtul_htc_asia_wwe
Release: 1.21.707.1
Version: 4.4.4
Platform: MT6752
Using Algo 1.
NVRAM Dumped OK.
C:\Documents and Settings\fullunlock\My Documents\Android_MTK\nvram_backup\META_MODE_NVRAM _MT6752_HTC Desire 820s dual sim_11_11_2016_11_55_43.zip
Reading imei
IMEI[1]: fffffffffffffff
IMEI[2]: fffffffffffffff
Writing imei
IMEI[1] TO UPDATE: 35479007skyulock
IMEI[2] TO UPDATE: 35479007skyulock
Writing data, wait....
IMEI repair OK.
All done.

Huawei Y560-U20 Write Pac File Without Any Dead Risk

Huawei Y560-U20

Write Pac File Without Any Dead Risk

With

***NCK BOX***

VFD 500 unlock done 100% Tested

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.1
Selected model: MT6735M
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM210)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) TOSIBA 0x303038473730
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 11010030303847 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM200)
OTP IMEI: 3579110710*****
MODEL FROM PROINFO: V500-2AVDRO1
SECRO FROM PROINFO: X8F9FL30BP00
Reading security, wait...
Block1(N): Locked (remain:7) Code : 00815142
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Block1(N): Locked (remain:10) Code : 00815142
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
ALGO[2]
Unlock finished.
Wait untill phone will start charging.
All done.

Tecno J7 network Sim Unlock successfully done 100% Tested

Tecno j7 successfull with nck box World's First

---

Please insert USB cable now...
[12]Detected: PreLoader USB VCOM Port (COM12)

Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[31]META Port Detected: Gadget CDC VCOM Driver (COM31)
USB\VID_0E8D&PID_2007\5&290A8F25&0&1
Start sync target, waiting responce.....
[AP]BaseBand CPU : MT6582,S01
[AP]APP_VER: J7-G345-A1-KK-RWA-MTN-R6-20150706
[META]BaseBand CPU : MT6582, E01
[META]SW_VER : MOLY.WR8.W1315.MD.WG.MP.V35.P5
[META]HW_VER : RATECH82_CWET_RLK_KK_HSPA_HW
Phone imei[1] : 358656062475683
Phone imei[2] : 358656062475691
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.

blu neo x n070u frp remove done

Exe version: NCKDongle AndroidMTK 2.5.7.1
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM21)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x533130303034
EMMC FW VERSION: 08:00:00:00:00:00:00:00
EMMC CID: 70010053313030 : 000000000000000000
EMMC UA SIZE: 0xe4000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe4c00000 [3.574 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM190)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.

Alcatel OT-5010G unlock code done

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.7.2
Selected model: OT-5010G
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM6)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010046373232 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : PreLoader USB VCOM (Android) (COM8)
OTP IMEI: 014629007193782
MODEL FROM PROINFO: 5010G-2TWCDO1
SECRO FROM PROINFO: X5E0NL03BS10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:3) Code : 5553407227176850
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

Blackbery 9700 Bold mep 0 Unlock done

---

Reading data, do not disconnect phone, wait.....
Connecting, please wait
OS NV : 1976-1992
Hardware ID : 0x04001507
OS Version : 5.1.0.175
Pin :236576d8
Device: BlackBerry 9700 Bold[0x04001507]
Trying to connect phone
Please wait take a while...
MEP : MEP-14074-003
PRD : PRD-17739-038
Backup saved in folder backup...
Challenge RTAS Signature...
[5]Preparing to process...
Processing...
Calculating succes...
Modifying Phone Data...
0 MEP Unlock Done
All Done.
--------------------------
Log saved to:
logs\0x04001507_236576d8_mep0_1.txt

Htc desire 820s dead recoverd done

CUSTMER TRY TO ROOT THIS PHONE AND AFTER WRITE WRONG FILE BY CUSTMER PHONE DEAD AND RECOVERD BY ME WITH NCK BOX

HUAWEI Y625-U32 reset privacy & imei repair done

Reset Privacy

Exe version: NCKBox AndroidMTK 1.8.7.0
Selected model: MT6572_EMMC
Action: Reset Privacy
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM6)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) SAMSUNG 0x4b3558564d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004B355856 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Not need to swith to high speed port, continue with this settings.
Dumping data, wait.
Value found, procesing[010c][00460000]
Resetting phone.
FORMAT EMMC FLASH : BEGIN: 0x46b40000 - LEN: 0x2c000000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
All done.




Selected connection metod: SpMeta Connection
Exe version: NCKBox AndroidMTK 1.8.7.0
Selected phone: MT6572_EMMC
Action : IMEI REPAIR.
IMEI[1] for write : 353407100108968
IMEI[2] for write : 351035090003907
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
[6]Detected: MediaTek PreLoader USB VCOM Port (COM6)
\\?\usb#vid_0e8d&pid_2000#5&f86e282&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[39]META Port Detected: MediaTek USB VCOM (Android) (COM39)
USB\VID_0E8D&PID_2007\5&F86E282&0&1
Start sync target, waiting responce.....
Starting META using port[COM39], wait...
Brand: HUAWEI
Board: HUAWEI Y625-U32
Model: HUAWEI Y625-U32
Name: HUAWEI Y625-U32
Release: Y625-U32V100R001C328B104
Version: 4.4.2
Platform: MT6572
Using Algo 1.
NVRAM Dumped OK.
C:\Users\dereje\Documents\Android_MTK\nvram_backup \META_MODE_NVRAM_MT6572_HUAWEI Y625-U32_07_08_2016_12_03_24.zip
Reading imei
IMEI[1]: fffffffffffffff
IMEI[2]: fffffffffffffff
Writing imei
IMEI[1] TO UPDATE: 353407100108968
IMEI[2] TO UPDATE: 351035090003907
Writing data, wait....
IMEI repair OK.
All done.

Alcatel one touch idol 3 OT-60450 unlock done

PHONE[B]: OT-9020A
Port: Qualcomm HS-USB Diagnostics 9000 (COM5)
Build id: MPSS.DPM.2.0.2.c1.6-00022-M8936FAAAANUZM-1.26298.1.28320.1
Compile Date: Sep 22 2015
Compile time: 10:32:39
Release date: Aug 31 2015
Release time: 03:00:00
IMEI: 014497000564940
Reading, wait.
Backup saved to: C:\Users\Administrator\Documents\NckMain\backup\al catel_android\OT-9020A_014497000564940_simlock_backup_1.bin

Simlock Status:
SIMLOCK[0] Locked: Counter[6]
SIMLOCK[1] Unlocked
SIMLOCK[2] Unlocked
SIMLOCK[3] Unlocked
SIMLOCK[4] Unlocked
Start direct unlock, wait....
Direct unlock done.
Please restart phone.
--------------------------
Log saved to:
C:\Users\Administrator\Documents\NckMain\Exe_Logs\ OT-9020A_014497000564940_unlock_1.txt
Done.
*** DANMIT AGAIN NCK KICK *** THIS ALCALTEL

QMobile Noir Z12 FRP Reset Done

QMobile Noir Z12

FRP Reset Done

Amazing Time Only 2.Sec

(With)

***NCK BOX***

FRP Reset

------------------------------------------------------

Meta Info

-----------------------------------------------------------

Lenovo A319 MT6572 Stuck On Logo Solved

Lenovo A319 MT6572
Stuck On Logo Solve By Flashing

Code:

 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: MT6572_EMMC
 Exe version: NCKBox AndroidMTK 1.8.7.0
 Scenario: [1]Full Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM10)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A48344732 : 000000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Not need to swith to high speed port, continue with this settings.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 FORMAT EMMC FLASH :  BEGIN: 0x61f40000      

Q Mobile i9 Dead Recover Successfully Done

Q i9 Recover Successfully Done

(With)

***NCK BOX***

LG-b220 reset user code done

selecte alcatel 3002g

Connect phone in boot mode ...
USB\VID_1004&PID_6000_DIAGInterface
Com port ok : COM64
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM64)
BaseBand CPU : MT6260
SW_VER : MAUI.11BW1308_MUSE_SP.W14.15
HW_VER : A100_HW
Meta mode conected ok, start reading phone....
Backup saved :C:\NCK Box\GenericMTK\backup\3002G by SFR__phone_barcode.zip
User code(Active) : 19881988
User code reset :OK
META END OK.
All done.

Logicom L-Ement 501 Format Done

Format Logicom L-Ement 501


First Try

EXE: NckBox Spreadtrum Module 0.1

SELECTED: SC7731g_EMMC
ACTION: Format UserData
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM337)
Sending loader, keep boot key untill loader start.
Reconnecting phone...
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
Reading extended info, wait...
Wrong responce.
Error while read flash(1).
Formating userdata, wait...
Formating cache, wait...
[misc]Format OK.
Total Time: 00:01:03
Done.